Skanner 24 Gaff Cutter

photos       Bookmark and Share

Click and drag with your mouse to move around the view, or use the arrow keys.

Virtual tours use the java applet PTViewer. Many machines will already be able to run this, but should a tour not work for you, please follow this link to download the Sun JVM.


Main Cabin

Skanner 24 Gaff Cutter - Details

Designed by Michael Hawes and built by Skanner Yachts Limited, the Skanner 24 is a lovely traditional gaff rigged cutter built in GRP with teak decking.

Solidly built and with head turning classic looks she makes an excellent coastal cruiser with comfortable accommodation for two.

She is classed as a 2/3 berth, the extra quarter berth is under the port side decking. Her overall length is 27 feet with the bowsprit. Her beam is aprox 8ft 3inches and her draft is 2feet 9inches. Her sail plan is a gaff rig cutter. Her ballast is a lead encapsulated keel.

She was built in 1998, probably the last built before the demise of the company and not commissioned until 2001.

The price includes the custom built road trailer pictured. The owner used this to tow her from Cornwall to Scotland with his 4x4.

The decking has been recently fully stripped cleaned and relaid but a considerable amount of work is still required, particularly in the area of the cockpit to restore her to excellent condition after rain water ingress damage.


Specs:

Hull : GRP
Year : 1998
Berths : 2
LOA : 27' 0" (8.2m)
LOD : 24' 0" (7.3m)
Beam : 8' 2" (2.5m)
Draft : 2' 8" (0.8m)
Keel : Long
Rig : Gaff Cutter
Engine Type : Inboard
Engine : 10hp Yanmar
Fuel : Diesel
Location : Loch Sween




Accommodation:

The main cabin contains nav station, galley and two quarter berths. A further quarter berth is under the port side decking.
The heads compartment is forward with a large wet locker/hanging space in the forepeak


Galley:

Located to the right of the companionway the galley has a gimballed single burner stove and stainless steel sink with manually pumped cold water.

The sink and stove can be covered to create a food preparation area


Sails:

Gaff main, staysail and headsail.
Roller reefing to headsail and staysail.


Electrical System:

12V


Equipment:

Road trailer
Anchor
Assorted warps and fenders


View all high res photos on one page


Archived Boats

This boat is no longer for sale and remains here solely as an information resource for those researching Skanner 24 Gaff Cutter's.

 

These photos should not be relied upon in the purchase of any boat of a similar type as enormous variations can occur between boats even of the same specification.

 

All photos, details and virtual tours remain copyright of Western Horizon Yachts Ltd. Linking to or using them to facilitate a sale indicates acceptance of our terms of business - Please contact us if you wish to link to or use this resource for any reason.

 

Agent details

visited and photographed by Claire France and Robert White for Western Horizon Yachts, Scotland
Listing started in April 2007

Enquire about this boat

This boat is no longer for sale, but you are welcome to contact us with any questions you have about it or similar boats.

Name:

Your E-mail Address:

Your Telephone Number: (not required)

Message:



Or Telephone

Office: 08444 144990
+44 (0)1631 524 500
Mobile: 07968 123524

Referral Agent Details

This boat was listed in association with ???

Disclaimer

All particulars given on this website are intended as a guide only and form no part of any contract.


Buyers are strongly advised to check all details personally and to employ a qualified marine surveyor to perform a survey prior to purchase.


Vendors are not selling in the course of business unless otherwise stated.


The photographs and details on this site are provided on the understanding that all negotiations will be conducted by Western Horizon Yachts acting as broker for the vendor.


All photography and virtual tours remain copyright of Western Horizon Yachts Ltd 2006 - 2017. and may not be used or linked from elsewhere without first obtaining written permission.